Superflywheel energy storage system

A windpowered system using the superflywheel configuration for energy storage is considered. Basic elements of superflywheels are thin rods assembled in pregrooved hub lamina so that they fan out in radial orientation. Adjacent layers of hub lamina are assembled 90 degree in rotation to each other so as to form a circular brush configuration. Thus stress concentrations and rod failure are minimized and realistic failure containment for a high performance flywheel is obtained

Thermodynamic analysis of a novel fossil-fuel–free energy storage system with a trans-critical carbon dioxide cycle and heat pump

This paper presents and analyzes a novel fossil-fuel–free trans-critical energy storage system that uses CO2 as the working fluid in a closed loop shuttled between two saline aquifers or caverns at different depths: one a low-pressure reservoir and the other a high-pressure reservoir. Thermal energy storage and a heat pump are adopted to eliminate the need for external natural gas for heating the CO2 entering the energy recovery turbines. We carefully analyze the energy storage and recovery processes to reveal the actual efficiency of the system. We also highlight thermodynamic and sensitivity analyses of the performance of this fossil-fuel–free trans-critical energy storage system based on a steady-state mathematical method. It is found that the fossil-fuel–free trans-critical CO2 energy storage system has good comprehensive thermodynamic performance. The exergy efficiency, round-trip efficiency, and energy storage efficiency are 67.89%, 66%, and 58.41%, and the energy generated of per unit storage volume is 2.12 kW·h/m3, and the main contribution to exergy destruction is the turbine reheater, from which we can quantify how performance can be improved. Moreover, with a higher energy storage and recovery pressure and lower pressure in the low-pressure reservoir, this novel system shows promising performance

MaimAir: A flexible and modular energy storage system for tomorrow energy banks

We considered a novel energy storage system based on the compression of air through pumped water. Differently from CAES on trial, the proposed indirect compression leaves the opportunity to choose the kind of compression from adiabatic to isothermal. The energy storage process could be both fast or slow leading to different configuration and applications. These novel storage system are modular and could be applied in different scales for different locations and applications, being very flexible in charge and discharge process. The system may offer an ideal energy buffer for wind and solar storage with no (or negligible) environment hazard. The main features of this novel energy storage system will be showed together with overall energy and power data. Despite CAES technology has already started being exploited, a lot of improvement is possible. In traditional CAES, compression of air takes place in the compressor, that is then moved to the storage vessel. Similarly, air is taken from the vessel and introduced in turbine for expansion. In the proposed system, air is compressed and expands directly in the storage vessel. This is done through a water piston that modifies air volume, reducing it during charge and increasing it during discharge. The water piston is used as heat storage so to absorb heat during compression and reject it during expansion, too. The new system is thus a Hydraulic compressed air energy storage (HYCAES). It is composed of high pressure storage vessel, almost full of air when fully out of power, an atmospheric pond for water storage, a water pump and a hydraulic turbine and connecting pipes. It is not ever-new, as there are some papers illustrating similar systems . In present paper, thermodynamic aspects of proposed systems will be analyzed to prove its energy feasibilit

Combined solar collector and energy storage system

A combined solar energy collector, fluid chiller and energy storage system is disclosed. A movable interior insulated panel in a storage tank is positionable flush against the storage tank wall to insulate the tank for energy storage. The movable interior insulated panel is alternately positionable to form a solar collector or fluid chiller through which the fluid flows by natural circulation

System characterization of a magnetically suspended flywheel

The purpose of flywheel energy storage is to provide a means to save energy during times when the satellite is in sunlight, and then return the energy during the time when the satellite is in darkness. Typically, an energy storage device operates cyclically, where for satellites in Low Earth Orbit (LEO) the typical period is 60 minutes of sunlight followed by 30 minutes of darkness. If a lifetime of 17 years is required the energy storage system must be capable of sustaining approximately 100,000 cycles. The recent developments at the University of Maryland and how these progressions apply to a 500 Watt-hour magnetically suspended flywheel stack energy storage system are covered. The work includes hardware testing results from a stack flywheel energy storage system, improvements in the area of non-contacting displacement transducers, and performance enhancements of magnetic bearings. The experimental results show that a stack flywheel energy storage system is a feasible technology

Ubiquitous energy storage

This paper presents a vision of a future power system with "ubiquitous energy storage", where storage would be utilized at all levels of the electricity system. The growing requirement for storage is reviewed, driven by the expansion of distributed generation. The capabilities and existing applications of various storage technologies are presented, providing a useful review of the state of the art. Energy storage will have to be integrated with the power system and there are various ways in which this may be achieved. Some of these options are discussed, as are commercial and regulatory issues. In two case studies, the costs and benefits of some storage options are assessed. It is concluded that electrical storage is not cost effective but that thermal storage offers attractive opportunities

Energy Harvesting Communication System with SOC-Dependent Energy Storage Losses

The popularity of Energy Harvesting Devices (EHDs) has grown in the past few years, thanks to their capability of prolonging the network lifetime. In reality, EHDs are affected by several inefficiencies, e.g., energy leakage, battery degradation or storage losses. In this work we consider an energy harvesting transmitter with storage inefficiencies. In particular, we assume that when new energy has to be stored in the battery, part of this is wasted and the losses depend upon the current state of charge of the device. This is a practical realistic assumption, e.g., for a capacitor, that changes the structure of the optimal transmission policy. We analyze the throughput maximization problem with a dynamic programming approach and prove that, given the battery status and the channel gain, the optimal transmission policy is deterministic. We derive numerical results for the energy losses in a capacitor and show the presence of a \emph{loop effect} that degrades the system performance if the optimal policy is not considered.Comment: In Proc. IEEE Twelfth Int. Symposium on Wireless Communication Systems (ISWCS), pp. 406-410, Aug. 201

Energy Storage Sharing Strategy in Distribution Networks Using Bi-level Optimization Approach

In this paper, we address the energy storage management problem in distribution networks from the perspective of an independent energy storage manager (IESM) who aims to realize optimal energy storage sharing with multi-objective optimization, i.e., optimizing the system peak loads and the electricity purchase costs of the distribution company (DisCo) and its customers. To achieve the goal of the IESM, an energy storage sharing strategy is therefore proposed, which allows DisCo and customers to control the assigned energy storage. The strategy is updated day by day according to the system information change. The problem is formulated as a bi-level mathematical model where the upper level model (ULM) seeks for optimal division of energy storage among Disco and customers, and the lower level models (LLMs) represent the minimizations of the electricity purchase costs of DisCo and customers. Further, in order to enhance the computation efficiency, we transform the bi-level model into a single-level mathematical program with equilibrium constraints (MPEC) model and linearize it. Finally, we validate the effectiveness of the strategy and complement our analysis through case studies